Expert Recommendations

Cycle Hill Tyre Changer

Cycle Hill

For the occasional tyre change. Intended for home use only. Ideal for Dirt Bike, ATV, Harley Davidson, and Vintage wheels. Will work on all wheels however it is not as ergonomic and the Standard No-Mar Tyre Changers. Clamps wheels well but limited clamping pressure is understood with the smallest frame arm structure. Delux arm and Scratchproof Bead Breaker and Roll-On Base are accessories. High Praises by "Motorcycle Consumer News" 2011.

Classic Model Tyre Changer

Classic Model

Designed for all Normal size motorcycle wheels and average size automotive wheels. Some accessories may be necessary for Cruisers, Dirtbikes and ATV tyres. Options: Hitchmount, Roll-On Base, ATV beadbreaker, Posi-Clamps, Spoonbars, Xtra hand clamps. Designed for All Standard, Sport, and Sport Touring wheels. Commercial grade.

Need to compare the specs?

**We recommend when mounting any Gray Colored No-Mar Tyre Changer to rotate the unit 45 degrees "Clockwise" with overhead arms in back position for Classic and Cycle Hill or Arm swing to left 90 degrees on Jr. Pro and Pro models, while maintaining at least two inches from wall to mark placement of Floor mount bolt holes prior to drilling to ensure proper wall clearance and machine positioning. By rotating the unit 45 degrees it gives the operator clearance for their body between the Mount/ Demount bar and the wall while beginning to install the second half of the tyre with the M/D bar otherwise the operator will be tempted to use the bar incorrectly and may never get the tool to function as it was designed.